For working in challenging areas of tough grass. STIHL 4-point anti-vibration system, STIHL ErgoStart, multi-function handle, bike handle, tool-free handle adjustment, 2-MIX engine, STIHL M-Tronic.
Technical data
Capacity cu-in |
2,8 |
Capacity cm3 |
45,6 |
Performance kW |
2,2 |
Performance Um |
3 |
Performance PS |
3 |
Weight Pounds 1) |
18,7 |
Weight kg 1) |
8,5 |
Sound pressure level with plastic tool dB(A) 2) |
101 |
Sound pressure level with metal tool dB(A) 2) |
100 |
Sound power level with metal tool dB(A) 2) |
113 |
Sound power level dB(A) 2) |
113 |
Vibration value, left with plastic tool m/s2 3) |
2,5 |
Vibration value, left with metal tool m/s2 3) |
1,9 |
Vibration value, right with metal tool m/s2 3) |
1,6 |
Vibration value, right with plastic tool m/s2 3) |
2,1 |
Total length cm 4) |
179 |
Cutting diameter mm |
480 |
Fuel tank capacity oz |
25,4 |
Tank volume l |
0,75 |
Speed at maximum power Um |
9.500 |
1) Without fuel, cutting tool and without protection
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Without cutting tool
Standard features
-
STIHL M-Tronic
This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
-
STIHL 2-MIX-Engine
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
-
Simplified starting system
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
-
Bike handle
When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
-
STIHL ErgoStart (E)
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
-
Multi-function control handle
Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.
Compensator
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
-
Tool free handle adjustment
The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage, the handle can be rotated by 90°.
The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice.
This item has 1636 views.